Trisonic remote codes are essential when you program the remote. Not only a Trisonic but all universal remote also has a set of codes to recognize the device and enable the settings. The remote programming procedure can’t be completed without codes. In this post, I will share all the Trisonic universal remote codes and their programming instructions, which you can use to program the Trisonic remote on your own.
What Are The Codes To Program A Trisonic Universal Remote?
Trisonic has a set of codes that connects the remote to the device. The codes are very specific and vary from one brand to another brand. Sometimes you may notice multiple codes assigned for a single brand’s device, but all the codes do not work for your device. You will need to test all the codes assigned for your device until the remote matches a valid code when you are programming the remote. It is not a difficult task. Suppose you read all the information mentioned here that simplifies your programming. We have tested these codes and programming methods to help you program the Trisonic remote ts-rc408.
| Brand | Codes |
| AOC | 0001, 0104, 0002, 0330, 0508 |
| Apex | 0232, 0223, 0003, 0127, 1313 |
| Citizen | 0115, 0002, 0532, 0402, 0112 |
| Coby | 1710, 1314 |
| Curtis Mathaes | 0112, 0437, 0704, 0701, 0415 |
| Daewoo | 0082, 0811, 0014, 0102, 0618, 0616, 0808 |
| Daytron | 0682, 0008 |
| Duraband | 0016, 0520, 0323, 0817 |
| Element | 1918 |
| Emerson | 1818, 0872, 0008, 0908, 0324, 0134, 0198, 0196, 0004, 0304, 0305 |
| Envision | 0002, 0502, 1519, 1302 |
| Funai | 1134, 1304, 1204, 0608, 0708 |
| Gateway | 0206 |
| GE | 0704, 0018, 0502, 0067, 0006, 0134 |
| Goldstar | 0006, 0102, 0002, 0017, 0430, 0224 |
| Haier | 0709, 0023, 0323, 1316, 0195 |
| Hisense | 0410, 0701, 0002, 0806, 0316, 1219, 0819, 0223, 1203 |
| Hitachi | 0816, 0410, 1801, 0715, 0808, 0002 |
| Ilo | 0421, 1608, 1903, 0620, 1515, 1812, 1004 |
| Insignia | 1619, 1719, 0520, 0323, 0811, 0115, 0213, 0316, 1414, 0504 |
| JBL | 0837 |
| JC Penney | 0312, 0512, 0704, 0112, 0801 |
| JCB | 0601 |
| Jensense | 0009, 0620, 0914 |
| JVC | 0715, 0204, 0608, 0617, 0006 |
| Konka | 0911, 0906, 0203, 0206, 0842 |
| LG | 0015, 0002, 0324, 0814, 0117, 0502 |
| Magnavox | 1818, 0002, 0919, 1914, 0430 |
| Mitsubishi | 0715, 0002, 0062, 0712, 0718 |
| NAD | 0902, 0912, 0120, 0512 |
| NEC | 1848, 0002, 0719, 0608, 0001 |
| Olevia | 1902, 1304, 1915, 1217 |
| Onwa | 0906, 0816 |
| Optimum | 0818, 0038, 0708, 1190 |
| Panasonic | 1818, 0418, 0738, 0818 |
| Philips | 0017, 0807, 0821, 1818, 1071 |
| Philco | 1417, 0002, 0037, 0918, 0702 |
| Pioneer | 0120, 1118, 0808, 0602, 0618, 0818 |
| Polaroid | 1318, 1817, 1218, 0916, 0818, 1218 |
| Proscan | 0002, 0121, 1802, 0328, 1180 |
| Quasar | 0718, 0007, 0418, 0617, 0138 |
| Radio Shack | 0406, 0418, 1048, 0617, 0138 |
| RCA | 0312, 0104, 0408, 0418, 1048, 0602, 0024 |
| Realistic | 3002, 0704, 0024, 0802, 0806 |
| Samsung | 0112, 0002, 2932, 0808, 3437, 0212 |
| Sansui | 0118, 0432, 0031, 0041 |
| Sanyo | 0806, 0011, 0428, 0032, 0030, 1014 |
| Sharp | 0909, 0309, 0907, 0032, 0111, 0224 |
| Sony | 0414, 0801, 0062, 0438, 0816 |
| Soundesign | 0502, 0902, 0906, 0452 |
| Sylvania | 0907, 0002, 0715, 0520, 0708 |
| Teknika | 0152, 0502, 0906, 0704, 0112 |
| Toshiba | 0112, 0517, 0512, 0013, 0618, 0020 |
| Vizio | 1510, 0709, 0009, 1419, 0015, 1202 |
| Wards | 0706, 0622, 0794, 0432, 0108 |
| Westinghouse | 0324, 0808, 0283, 0237 |
| Yamaha | 0616, 0002, 0732, 0608 |
| Zenith | 0224, 0406, 0418, 0324, 0712, 0713, 0324, 0407 |
How Do I Program My Trisonic Universal Remote
You can program the Trisonic remote in two ways, named manual and auto-code search methods. Both methods are recommended for Trisonic remote programming. But the code entry method is simple when compared with the auto-code search method. You must enter a valid code using your remote keypad in the manual method. Follow the instructions mentioned below to program the remote.
- Note the codes before programming or take a screenshot on your phone to look at the codes quickly while programming the remote. The codes are much essential during the programming. Do not enter incorrect code that can interrupt your remote programming.
- “Turn on” the device you wish to control with Trisonic universal remote and insert two batteries into the remote.
- Keep the remote in front of the device and press the code search button on the remote until the LED indicator blinks and stays solid.
- After this, select the component button, such as TV, DVD, CBL, etc. The LED indicator will blink once and remains on.
- Now, use the remote keypad to enter the code you selected for your device. The LED indicator will turn off if the entered code is correct. If the LED indicator blinks and stays solid until it receives a valid code.
- After completing this procedure, press and hold the “POWER” button on the remote. The device should turn off if everything is done correctly. Turn back on the device using the remote “POWER” button.
Finally, check the remote buttons to control the expected functions. If everything works correctly, it means the remote is ready to use.
If you can’t find a valid code for your device, you can program the remote in the auto-code search method.
Auto-Code Search Method: The remote will find a valid in this procedure. The codes in the remote database send the device and pair with it. However, this process can take longer than the manual method, so you must wait until the procedure completes.
- “Turn on” the device you wish to control using the Trisonic remote.
- Inset two new batteries into the remote and locate the remote towards the device.
- Press the “POWER” button and desired component button on the remote until the LED indicator remains on.
- After that, press the “POWER” button once on the remote. The LED indicator will blink several times until the remote sends a valid code to the device.
- The device will turn off when it gets a valid code. Press the “OK” button immediately when the device turns off to save the code.
- If the device doesn’t turn off, repeat the same procedure from step 2.
After completing this procedure, check the remote keys to control the device. The remote is programmed with a valid code if everything works as expected.
How To Reset Trisonic Remote With And Without Remote
Remove the batteries from the remote and press the “POWER” button for 30 seconds. After this, insert the new batteries into the remote and press the “POWER” button. The LED indicator will blink once the remote is reset to factory settings. Or you can follow how to reset the Noble Skiodo remote guide also
Conclusion:
Trisonic remote codes are more effective and accurate, which connect the device with the remote without any error if you follow the programming procedure correctly. In addition, if you can’t find a valid code for your device or the device is not listed in the code list, you can program the remote using the auto-code search method. As mentioned in this post, you can reset the remote if there is any error like ge universal remote. Trisonic universal remote can control up to 6 devices, but you must program the remote separately for each device using a different code as mentioned in the programming instructions. Leave a message in the comment box if you have any doubts or errors.
